Specification Parameters
General
- Overall Weight
- 105kg · Excluding aircraft
- Dimensions (Lid Open)
- 1675mmx885mmx735mm · L×W×H
- Dimensions (Lid Closed)
- 800mmx885mmx1065mm · L×W×H
- Input Voltage
- 100 至 240 VAC · 50/60 Hz
- Input Power
- 1500 W · MAX
- Operating Temperature
- -35 至 50°C
- Ingress Protection Rating
- IP55
- Stowable Drone Capacity
- 1 台
- Max Landing Wind Speed
- 12 m/s
- Max Operating Altitude
- 4000 m
- Max Operating Radius
- 7000 m
RTK Base Station
- Positioning Accuracy (Horizontal)
- 1 cm+1 ppm(RMS)
- Positioning Accuracy (Vertical)
- 2 cm+1 ppm(RMS)
Charging Performance
- Output Voltage
- 18 至 26.1 V
- Charging Time
- 25 分钟 · Charging environment temperature 25℃, aircraft battery charged from 10% to 90%
Image Transmission
- Image Transmission Scheme
- O3 图传行业版
- Operating Frequency
- 2.4000-2.4835 GHz / 5.725-5.850 GHz
- Antenna
- 4 天线,2T4R
Air Conditioning System
- Operating Voltage
- 48 VDC · TEC air conditioning
Backup Battery
- Battery Capacity
- 12 AH · 24 V lead-acid battery, with a runtime of more than 5 hours
Network Access
- Ethernet Access
- 10/100/1000Mbps 自适应以太网口
- 4G Access
- 配合 DJI Cellular 模块和 SIM 卡使用
Sensors
- Hatch Monitoring Camera Resolution
- 1920×1080 · Field of view (FOV) 180°, supports white light fill lighting
Lightning Protection
- AC Power Interface
- 40 KA(8/20us波形) · TYPE 2 protection level compliant with EN/IEC 61643-11
- Ethernet Interface
- 1.5 KA(8/20us波形) · CATEGORY C protection level compliant with EN/IEC 61643-21
Software Support
- Application
- DJI Pilot 2 · Connects to DJI Dock via DJI RC Plus for configuration and debugging
- Cloud Platform
- 大疆司空 2(默认支持) · Third-party cloud platforms can integrate via DJI Cloud API API development
Expansion
- Open Protocol
- 大疆上云 API
Interfaces and Dimensions
- Hatch Open
- 1675mmx885mmx735mm(长x宽x高)
- Hatch Closed
- 800mmx885mmx1065mm(长x宽x高)
Comparison with Similar Products
| Specifications | 本品 · 大疆机场 | TK2101 | Walker S2 | As2 | Unitree B2 |
|---|---|---|---|---|---|
| Main controller | — | — | — | — | — |
| NPU | — | 275 TOPS | — | — | — |
| Memory / VRAM | — | — | — | — | — |
| Reference unit price | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote |
| Inventory | — | — | — | — | — |
Product introduction
The DJI Dock (first generation) is a fixed drone automated dock designed for unattended automated flight operations.
Structure and deployment: The unit weighs 105 kg (excluding the aircraft), with the canopy open dimensions of 1675×885×735 mm and closed dimensions of 800×885×1065 mm. Input voltage is 100 to 240 VAC (50/60 Hz), input power is 1500 W MAX, the IP rating is IP55, and it can house 1 drones. Before deployment, confirm the landing site's load-bearing capacity, power supply capacity, and lightning protection conditions: the AC power interface has lightning protection of 40 kA (8/20us waveform), meeting EN/IEC 61643-11 TYPE 2 protection level.
Environment and operational boundaries: Operating temperature range is -35 to 50°C, maximum operating altitude is 4000 m, maximum allowed landing wind speed is 12 m/s, and maximum operation radius is 7000 m. Built-in sensors monitor wind speed, rainfall, ambient temperature, water immersion, in-dock temperature and humidity, and vibration, complemented by a canopy monitoring camera with a 180° field of view and a white light fill lamp.
RTK and communications: The built-in RTK base station supports GPS, BeiDou2/3, GLONASS, and Galileo multi-frequency bands, with positioning accuracy of horizontal 1 cm+1 ppm (RMS) and vertical 2 cm+1 ppm (RMS). Image transmission uses the O3 Enterprise transmission, operating at frequencies 2.4000-2.4835 GHz and 5.725-5.850 GHz. Network connectivity supports 10/100/1000 Mbps adaptive Ethernet ports; 4G access requires the DJI Cellular module and a SIM card.
Charging and power supply: Output voltage is 18 to 26.1 V; at 25°C ambient, the battery charges from 10% to 90% in approximately 25 minutes. The air conditioning system is a 48 VDC TEC cooler; the backup battery is a 12 Ah, 24 V lead-acid battery with a runtime of over 5 hours.
Software and expansion: Configuration and debugging are done via DJI RC Plus connected to DJI Pilot 2. The cloud platform supports DJI FlightHub 2 by default, and third-party platforms can integrate via DJI Cloud API API. The dock provides power, data interfaces, and installation space for edge computing expansion.