Specification Parameters
Processor
- Main control module
- ESP32 系列模组(可选 ESP32-WROOM-32E/32UE/32D/32U、ESP32-SOLO-1、ESP32-WROVER-E/IE、ESP32-WROOM-DA) · The same board supports multiple module configurations
Interfaces & System
- USB interface
- Micro USB · Can be used as a power supply or as a communication interface between the PC and the module
- USB-to-UART bridge
- 单芯片,高达 3 Mbps · Firmware download and serial communication
- Buttons
- EN 复位按键、Boot 下载按键 · Boot+EN to enter firmware download mode
- Programmable functions
- PWM、ADC、DAC、I2C、I2S、SPI 等 · Implemented by programming ESP32
Power Supply
- Power supply options
- Micro USB(默认)/ 5V、GND 管脚 / 3V3、GND 管脚 · The three methods must not be connected simultaneously
- Power indicator
- 5V Power On LED · Lights up when powered via USB or external 5 V
Interfaces and Dimensions
- Onboard module
- 见管脚布局图,来源页面未给出具体尺寸数字
资料下载
Comparison with Similar Products
| Specifications | 本品 · ESP32-DevKitC V4 | RDK S100 | DFR0706-1 | 5G模组/LTE模组/智能模组/Wi-Fi模组/GNSS模组(产品线总览,无具体型号) | DFR1231 |
|---|---|---|---|---|---|
| Main controller | ESP32(板载 ESP32-WROOM-32 等模组) | S100 智能计算芯片 | 国产 4核 1.2GHz | — | — |
| NPU | — | 80 TOPS | — | — | — |
| Memory / VRAM | — | 12 GB | 0.5 GB | — | — |
| Reference unit price | Request a Quote | ¥2,799 | ¥619 | Request a Quote | ¥39 |
| Inventory | — | — | — | — | — |
Product introduction
Purpose and positioning: ESP32-DevKitC V4 is the ESP32 development board introduced in Espressif's official Getting Started Guide, intended for application development and firmware flashing. Most pins of the onboard module are broken out, enabling programmable functions such as PWM, ADC, DAC, I2C, I2S, and SPI.
Configuration options: The same board supports multiple modules (ESP32-WROOM-32E, ESP32-WROOM-32UE, ESP32-WROOM-32D, ESP32-WROOM-32U, ESP32-SOLO-1, ESP32-WROVER-E, ESP32-WROVER-IE, ESP32-WROOM-DA) as well as optional male or female pin headers; Espressif's product selector tool can be used to confirm differences when choosing.
Power supply options: Three power supply methods are supported: Micro USB (default), the 5V/GND pins, and the 3V3/GND pins. Espressif warns that the three modes must not be connected simultaneously, otherwise the development board and/or the power supply may be damaged.
Interfaces and pins: The J2/J3 pin headers break out GPIO, power, reset, and other signals; the D0–D3, CMD, and CLK pins are used for internal SPI flash communication and are recommended not to be connected externally; when a WROVER-series module is mounted, GPIO16/17 are reserved for internal use. The USB-to-UART bridge supports speeds up to 3 Mbps, and the 5V Power On LED indicates power status.
Known issues: On earlier versions of the board, the C15 capacitor may cause the board to enter download mode at power-up or affect the GPIO0 output clock; if necessary, it can be removed completely.
Pre-purchase checks: Confirm the required module model and flash/RAM configuration, the pin header/socket form factor, and whether the C15 version issue affects your design.
Compilation Notes 内容由 AI 根据公开资料整理;事实与推断分开呈现。
Content Correction