此语言仍有 24 条内容或界面任务待翻译;未完成部分显示中文原文。
ESP32-PICO-KIT-1 Development BoardCategory Diagram
Content Correction
Brand 其它品牌

ESP32-PICO-KIT-1 Development Board

Model DFR0625Development Boards and Modules
Reference unit price¥90

Bulk RFQ
Reference subtotal ¥90

价格与库存供选型参考,正式报价和交期请供方确认。

Specification Parameters

Processor and Module

Module
ESP32-PICO-V3 · Full Wi-Fi and Bluetooth functionality

Storage

Integrated SPI flash
4MB · Storage integrated into the module

Interfaces and System

Module interfaces
ADC、DAC、触摸传感器、SD/SDIO/MMC主机控制器、SPI、SDIO/SPI从机控制器、EMAC、电机PWM、LED PWM、UART、I2C、I2S、红外远程控制器、GPIO、脉冲计数器 · List of module interfaces
Wi-Fi protocols
802.11 b/g/n(802.11n 速度高达 150Mbps) · Supports A-MPDU and A-MSDU aggregation; supports 0.4µs guard interval
Bluetooth protocols
蓝牙 v4.2 BR/EDR 和 BLE · NZIF receiver with sensitivity of –97dBm; CVSD and SBC audio

Power Supply

Power supply options
Micro USB(默认)、5V/GND 管脚、3V3/GND 管脚 · Three power supply options, any one of which may be used
Operating current
平均 80mA · Minimum supply current 500mA

Interfaces and Dimensions

Dimensions
47 x 20.3 x 10 mm
Solder pads on both sides
18 x 0.1"

Comparison with Similar Products

Specifications本品 · DFR0625RDK S100DFR0706-15G模组/LTE模组/智能模组/Wi-Fi模组/GNSS模组(产品线总览,无具体型号)DFR1231
Main controller—S100 智能计算芯片国产 4核 1.2GHz——
NPU—80 TOPS———
Memory / VRAM—12 GB0.5 GB——
Reference unit price¥90¥2,799¥619Request a Quote¥39
Inventory—————

Product introduction

Specifications and wireless capabilities: The development board is built around the ESP32-PICO-V3 module, which offers full Wi-Fi and Bluetooth functionality. Wi-Fi supports 802.11 b/g/n, with 802.11n speeds up to 150Mbps, A-MPDU/A-MSDU aggregation, and a 0.4µs guard interval, with a frequency range of 2.4GHz~2.5GHz; Bluetooth complies with v4.2 BR/EDR and BLE standards, with NZIF receiver sensitivity of –97dBm, AFH support, and CVSD and SBC audio support.

Interfaces and integration: Module interfaces include ADC, DAC, touch sensors, SD/SDIO/MMC host controller, SPI, SDIO/SPI slave controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, infrared remote controller, GPIO, and pulse counter; an on-chip Hall sensor is integrated, along with a 40MHz crystal oscillator and 4MB of SPI flash.

Power supply and operating conditions: Three power supply options are provided—Micro USB (default), 5V/GND pin, and 3V3/GND pin; average operating current is 80mA, with a minimum supply current of 500mA; the recommended operating temperature range is –40°C~85°C.

Development convenience: With the onboard USB-to-UART bridge circuit, developers can flash firmware and debug directly via a PC USB port; I/O and power pins are broken out to 18 0.1-inch solder pads and pin headers.

Pre-purchase verification: The source page is an online store product listing (points redemption mall), with the price shown on the page as ¥90.00; actual transaction and shipping terms should be confirmed with the seller before ordering. The shipping package includes ESP32-PICO-KIT-1 development board x1; the page provides entry points to documentation such as the product wiki, schematics, and PCB layout, but no direct HTTPS file links are given.

Compilation Notes 内容由 AI 根据公开资料整理;事实与推断分开呈现。

Content Correction

Product parameter comparison

Product Selection Assistant

让需求变成可修改的筛选条件

依据已录入参数生成条件,结果可查看和修改。帧率与性能需核对实测,不能仅凭算力数值保证。