此语言仍有 24 条内容或界面任务待翻译;未完成部分显示中文原文。
FireBeetle 2 ESP32-P4 Development BoardCategory Diagram
Content Correction
Brand DFRobot

FireBeetle 2 ESP32-P4 Development Board

Model FireBeetle 2 ESP32-P4Development Boards and Modules
StorageProvided by Supplier16GB
Reference unit priceRequest a Quote

Download DocumentsReference subtotal Request a Quote

价格与库存供选型参考,正式报价和交期请供方确认。

Specification Parameters

Processor

HP core
32 位 RISC-V 双核微处理器 320 MHz · Per hardware spec table; listed as 360MHz in product features
LP core
32 位单核 RISC-V 微处理器 40 MHz

Storage

PSRAM
32MB
Flash
16MB
HP L2MEM
768KB
LP SRAM
32KB
HP ROM
128KB
LP ROM
16KB

Interfaces & System

WiFi protocol
IEEE 802.11b/g/n/ax · 802.11ax is 20 MHz-only non-AP mode
WiFi bands
2.4GHz,支持 20/40MHz 频宽
Bluetooth
Bluetooth 5 · Rates: 125Kbps, 500Kbps, 1Mbps, 2Mbps
Digital I/O
x24 · Interface counts are maximums; function pins are multiplexed
MIPI CSI
2 通道 x1
MIPI DSI
2 通道 x1 · Compatible with Raspberry Pi 4B DSI screen cable pinout
USB
高速 USB OTG 2.0 x1 · Type-C port, supports flashing and debugging
UART
x5(另有 LP UART x1)
I2C
x2(另有 LP I2C x1)
SPI
x1(另有 LP SPI x1,另列 SPI x2) · The original pin table contains two coexisting SPI counts
I2S
x3(另有 LP I2S x1)
SDIO
2.0 x1
ADC
1 × 12 位 SAR ADC,7 个通道
TOUCH
4 通道
LED PWM
8 个通道
Infrared Transceiver
发送通道 x5、接收通道 x5

Power Supply

Operating Voltage
3.3V
Type-C Input Voltage
5V DC
VCC Input Voltage
5V DC
Operating Temperature
-10~60℃

Interfaces and Dimensions

Module Dimensions
25.4x60mm

资料下载

Comparison with Similar Products

Specifications本品 · FireBeetle 2 ESP32-P4RDK S100DFR0706-15G模组/LTE模组/智能模组/Wi-Fi模组/GNSS模组(产品线总览,无具体型号)DFR1231
Main controllerESP32-P4R32S100 智能计算芯片国产 4核 1.2GHz——
NPU—80 TOPS———
Memory / VRAM—12 GB0.5 GB——
Reference unit priceRequest a Quote¥2,799¥619Request a Quote¥39
Inventory—————

Product introduction

Specifications and Main Controller: The main controller is ESP32-P4R32, with an HP core that is a 32-bit RISC-V dual-core microprocessor (the parameter highlights section states 360MHz, while the hardware specifications table states 320 MHz — the two figures are inconsistent, so confirm the current chip version's clock frequency with the vendor before purchasing; the current chip revision is revision v1.0, with the clock configured at 360MHz), and an LP core that is a 32-bit single-core RISC-V at 40MHz. Memory configuration: 768KB HP L2MEM, 32KB LP SRAM, 128KB HP ROM, 16KB LP ROM, 32MB PSRAM, and 16MB FLASH.

Imaging and Multimedia: ESP32-P4 integrates a JPEG encoder/decoder, pixel processing accelerator (PPA), image signal processor (ISP), and H264 video encoder, supporting MIPI-CSI and MIPI-DSI signal input, with image capture and display at up to 720p@88fps or 1080p@30fps. The MIPI-DSI display is compatible with Raspberry Pi 4B DSI screen pinouts, and the MIPI-CSI is compatible with Raspberry Pi 4B CSI camera pinouts. The kit includes a ov5640 camera module and an amplifier module.

Wireless and Interfaces: Integrates a ESP32-C6-MINI-1 module (connected to ESP32-P4 via SDIO). WiFi protocol is IEEE 802.11b/g/n/ax (802.11ax in 20MHz non-AP mode only); the 2.4GHz band supports 20/40MHz channel widths. Bluetooth 5, with data rates from 125Kbps to 2Mbps. Pin resources include digital I/O x24, UART x5, I2C x2, I3C x1, multiple SPI/I2S, 1×12-bit SAR ADC with 7 channels, TOUCH with 4 channels, LED PWM with 8 channels, and 5 channels each of IR transmit and receive; the above counts are maximums, and function pins are multiplexed. The board also features a Type-C USB OTG 2.0 high-speed interface, a MEMS PDM microphone, and a TF card slot.

Power and Environment: Operating voltage 3.3V, Type-C input voltage 5V DC, VCC input voltage 5V DC, operating temperature -10~60℃, module dimensions 25.4x60mm.

Development Environment: Supports two development approaches, ESP-IDF and Arduino IDE. ESP-IDF can be deployed via the Windows tool installer, requiring toolchain, CMake, Ninja, Python, Git, and other components, and can be used with the Eclipse Plugin or VSCode Extension. For Arduino IDE, add the Espressif mirror board URL in Additional Boards Manager URLs, install the esp32 by Espressif Systems package, then select the ESP32 P4 Dev Module; enable USB CDC On Boot before flashing. MicroPython is also supported. Important limitation: MIPI-CSI and AI features must be used under ESP-IDF and are temporarily unavailable under Arduino.

Sources DF创客社区

Compilation Notes 内容由 AI 根据公开资料整理;事实与推断分开呈现。

Content Correction

Product parameter comparison

Product Selection Assistant

让需求变成可修改的筛选条件

依据已录入参数生成条件,结果可查看和修改。帧率与性能需核对实测,不能仅凭算力数值保证。