此语言仍有 24 条内容或界面任务待翻译;未完成部分显示中文原文。
FireBeetle 2 ESP32-UE (N16R2) IoT Development BoardCategory Diagram
Content Correction
Brand DFROBOT

FireBeetle 2 ESP32-UE (N16R2) IoT Development Board

Model DFR1140Development Boards and Modules
StorageProvided by Supplier16384GB
Reference unit price¥90

Reference subtotal ¥90

价格与库存供选型参考,正式报价和交期请供方确认。

Specification Parameters

Processor

Processor
Tensilica LX6双核处理器(一核处理高速连接;一核独立应用开发) · ESP32-WROOM-32UE-N16R2 module
Clock Frequency
240MHz
SRAM
520KB
ROM
448KB

Storage

Flash
16MB
PSRAM
2MB

Interfaces & System

Digital Pins
×17 · IO0、IO1、IO2、IO3、IO4、IO12、IO13、IO14、IO15、IO17、IO18、IO19、IO21、IO22、IO23、IO25、IO26
Analog Pins
×11
UART Interface
×3
SPI Interface
×1
I2C Interface
×1
I2S Interface
×1
DAC Interface
×2
Display Interface
GDI
Wi-Fi Protocol
802.11 b/g/n/d/e/i/k/r(802.11n 速度高达150 Mbps) · 2.4~2.5 GHz, FCC/CE/TELEC/KCC
Bluetooth Protocol
蓝牙V4.2 BR/EDR和BLE · Supports CVSD and SBC audio

Power Supply

USB-C Port Input
5V DC
PH2.0 Port Input
3.7V DC
VCC Pin Input
5V DC · Supports automatic dual-power switching, with two charging methods: USB and external DC

Interfaces and Dimensions

Module Dimensions
25.4mm × 60mm
Weight
23.4g

Comparison with Similar Products

Specifications本品 · DFR1140RDK S100DFR0706-15G模组/LTE模组/智能模组/Wi-Fi模组/GNSS模组(产品线总览,无具体型号)DFR1231
Main controllerTensilica LX6双核处理器(ESP32-WROOM-32UE-N16R2模组)S100 智能计算芯片国产 4核 1.2GHz——
NPU—80 TOPS———
Memory / VRAM—12 GB0.5 GB——
Reference unit price¥90¥2,799¥619Request a Quote¥39
Inventory—————

Product introduction

Specifications: The board carries the ESP32-WROOM-32UE-N16R2 module with a Tensilica LX6 dual-core processor clocked at 240MHz, SRAM 520KB, ROM 448KB, Flash 16MB, PSRAM 2MB, an on-chip 40MHz crystal, and a 32.768KHz crystal. Wireless supports 802.11 b/g/n/d/e/i/k/r (802.11n up to 150Mbps, 2.4~2.5GHz), and Bluetooth V4.2 BR/EDR and BLE with CVSD/SBC audio support. Peripherals include 17 digital pins, 11 analog pins, 3 UARTs, 1 SPIs, 1 I2C, 1 I2S, 2 DACs, 7 touch channels, 16 LED PWM channels, WS2812 RGB LED, and a GDI display interface. Power supply supports USB-C 5V, PH2.0 port 3.7V lithium battery, and VCC pin 5V, with automatic dual-power switching and two charging methods: USB and external DC. Programming is supported via Arduino IDE, ESP-IDF, and MicroPython. Dimensions 25.4mm×60mm, weight 23.4g, castellated-hole design. The package includes the board, a 2.4GHz WiFi Bluetooth antenna, and 18pin/14pin male and female headers. Compared with the onboard-antenna version, the main difference is the extended communication range via an external high-gain antenna. Before purchasing, it is recommended to check the FireBeetle series selection guide to confirm whether an external antenna and the 16MB/2MB memory configuration are needed.

Compilation Notes 内容由 AI 根据公开资料整理;事实与推断分开呈现。

Content Correction

Product parameter comparison

Product Selection Assistant

让需求变成可修改的筛选条件

依据已录入参数生成条件,结果可查看和修改。帧率与性能需核对实测,不能仅凭算力数值保证。