此语言仍有 24 条内容或界面任务待翻译;未完成部分显示中文原文。
Unitree Go2 Quadruped RobotCategory Diagram
Content Correction
Brand 宇树科技

Unitree Go2 Quadruped Robot

Model Go2Embodied AI Robots (Complete Units)
关键规格 1Provided by Supplier最大关节扭矩 45N·m
关键规格 2Provided by Supplier运动速度 0~2.5m/s
关键规格 3Provided by Supplier载荷 ≈7kg(极限约 10kg)
关键规格 4Provided by Supplier续航约 1-2h(标准电池)
Reference unit price¥9,997

Reference subtotal ¥9,997

价格与库存供选型参考,正式报价和交期请供方确认。

Specification Parameters

Mechanical specifications

Standing dimensions
70cm x 31cm x 40cm
Powered-off prone dimensions
76cm x 31cm x 20cm
Weight with battery
约15kg
Material
铝合金+ 高强度工程塑料

Electrical specifications

Supply voltage
28V~33.6V
Max operating power
约3000W

Performance specifications

Payload
≈7kg · Max ~ 10kg
Movement speed
0 ~ 2.5m/s
Max climbing step height
约15cm
Max climbing slope angle
30°
Max joint torque
45N·m · Torque varies across 12 joint motors; this is the max torque of the strongest joint motor

Interfaces & system

Wireless
WiFi6双频无线、蓝牙 5.2/4.2/2.1、4G模组(带GPS,选配)
Sensors
超广角4D激光雷达、无线矢量定位伴随模组、高清广角相机、足端力传感器 · ○/● markers indicate differences by configuration (AIR/PRO/X EDU)

Power

Smart battery
标准(8000mAh) · Optional 15000mAh extended-endurance battery; voltage 28.8V; runtime approx. 1-2h
Charger
标准(33.6V 3.5A)

Interfaces and Dimensions

Standing dimensions
70cm x 31cm x 40cm
Folded (powered-off) dimensions
76cm x 31cm x 20cm

Comparison with Similar Products

Specifications本品 · Go2TK2101Walker S2As2Unitree B2
Main controller—————
NPU—275 TOPS———
Memory / VRAM—————
Reference unit price¥9,997Request a QuoteRequest a QuoteRequest a QuoteRequest a Quote
Inventory—————

Product introduction

The Unitree Go2 is a consumer/research-grade biomimetic quadruped robot, standard-equipped with the in-house 4D LiDAR L2, delivering an ultra-wide 360°×96° sensing field of view with a minimum detection blind zone of 0.05m. Official tax-inclusive price starts at 9997 CNY, with configuration tiers including AIR, PRO, and X EDU. The robot supports movement at 0~2.5m/s, a payload of approx. 7kg (max approx. 10kg), and maximum joint torque of 45N·m, and features AI-trained gaits such as handstand walking and obstacle climbing. It is suitable for research exploration, secondary development, and complex-terrain mobility scenarios; some functions require manual operation or secondary development, and hazardous modifications are not advised.

Sources 宇树科技官网

Compilation Notes 内容由 AI 根据公开资料整理;事实与推断分开呈现。

Content Correction

Product parameter comparison

Product Selection Assistant

让需求变成可修改的筛选条件

依据已录入参数生成条件,结果可查看和修改。帧率与性能需核对实测,不能仅凭算力数值保证。