此语言仍有 24 条内容或界面任务待翻译;未完成部分显示中文原文。
RPLIDAR A3Category Diagram
Content Correction
Brand 思岚科技(SLAMTEC)

RPLIDAR A3

Model RPLIDAR A3Sensing & Perception
关键规格 1Provided by Supplier测量距离 25m(白色物体
关键规格 2Provided by Supplier增强模式)
关键规格 3Provided by Supplier采样频率 16000次/S
关键规格 4Provided by Supplier扫描频率 10Hz 典型值(5Hz-15Hz可调)
Reference unit priceRequest a Quote

Reference subtotal Request a Quote

价格与库存供选型参考,正式报价和交期请供方确认。

Specification Parameters

Measurement Performance

Measurement Range (Enhanced Mode)
白色物体:25m,黑色物体:10m · Suitable for indoor environments, maximum measurement range and sampling frequency
Measurement Range (Outdoor Mode)
白色物体:20m,黑色物体:TBD · Reliable sunlight resistance, suitable for indoor and outdoor environments
Sampling Frequency
增强模式 16000次/S,室外模式 10000次/S
Scan Frequency
典型值:10Hz(5Hz-15Hz可调)
Angular Resolution
0.225°
Measurement Blind Zone
0.2m · Identical in both modes
Scan Range
360°
Distance Resolution
≤实际距离的 1%(测距≤12m);≤实际距离的 2%(测距12m~25m) · Enhanced mode specification
Ranging Accuracy
实际距离的 1%(≤3 m);实际距离的 2%(3-5 m);实际距离的 2.5%(5-25m)

Interfaces & System

Communication Interface
TTL UART · UART serial output (3.3V level)
Communication Baud Rate
256000bps
Compatibility Mode
支持以往SDK/协议

Power Supply

Supply Voltage
5V · Supply current 450mA - 600mA
Power Consumption
2.25W-3W

Environment

Operating Temperature Range
0℃-40℃

Dimensions & Weight

Height
41mm
Body Diameter
76mm
Weight
190g

Interfaces and Dimensions

Height
41mm
Body Diameter
76mm
Weight
190g

Comparison with Similar Products

Specifications本品 · RPLIDAR A3RPLIDAR A1E1SEN0638-TFL1
Main controller———Kendryte K230—
NPU———6 TOPS—
Memory / VRAM———1 GB—
Reference unit priceRequest a QuoteRequest a QuoteRequest a Quote¥599¥999
Inventory—————

Product introduction

Specifications and ranging performance: RPLIDAR A3 offers Enhanced mode and Outdoor mode. Enhanced mode suits high-performance indoor environments, with a white-object measurement range of 25m and black-object range of 10m; Outdoor mode suits both indoor and outdoor environments, with a white-object measurement range of 20m and reliable sunlight immunity. Minimum ranging distance is 0.2m; sample rate is 16000 samples/s in Enhanced mode and 10000 samples/s in Outdoor mode; typical scan frequency is 10Hz (adjustable 5Hz-15Hz), angular resolution 0.225°, scan range 360°.

Accuracy specifications: ranging resolution is 1% of the actual distance (range ≤12m) to 2% (12m–25m); ranging accuracy is 1% of the actual distance (≤3 m), 2% (3-5 m), 2.5% (5-25m).

Interface and power supply: communication interface is TTL UART at 256000bps, outputting a UART serial signal (3.3V level); supply voltage is 5V, supply current 450mA-600mA, power consumption 2.25W-3W. It is compatible with previous SDKs/protocols; for integration, confirm the host has a TTL UART interface and 5V supply capability.

Dimensions and weight: height 41mm, body diameter 76mm, weight 190g. Operating temperature range is 0℃-40℃; avoid deploying beyond this temperature environment. Before purchase, verify the black-object outdoor-mode measurement range (source marked TBD) and SDK version compatibility.

Sources 思岚科技(SLAMTEC)

Compilation Notes 内容由 AI 根据公开资料整理;事实与推断分开呈现。

Content Correction

Product parameter comparison

Product Selection Assistant

让需求变成可修改的筛选条件

依据已录入参数生成条件,结果可查看和修改。帧率与性能需核对实测,不能仅凭算力数值保证。