此语言仍有 24 条内容或界面任务待翻译;未完成部分显示中文原文。
Unitree 4D LiDAR L1Category Diagram
Content Correction
Brand Unitree 宇树

Unitree 4D LiDAR L1

Model L1Sensing & Perception
关键规格 1Provided by Supplier360°×90° 超广角扫描
关键规格 2Provided by Supplier近处盲区0.05m
关键规格 3Provided by Supplier扫描距离30m@90%反射率
关键规格 4Provided by Supplier有效频率21600点/秒
Reference unit price¥999

Bulk RFQ
Reference subtotal ¥999

价格与库存供选型参考,正式报价和交期请供方确认。

Specification Parameters

Interface & System

Communication Interface
TTL UART
IMU
3轴加速度+3轴陀螺仪 · Built-in
Eye Safety Class
Class 1(IEC60825-1:2014)

Perception

FOV
360°×90° · Omnidirectional ultra-wide non-repetitive scanning
Scanning Range
20m(@90% 反射率) / 10m(@10% 反射率)(PM);30m(@90% 反射率) / 15m(@10% 反射率)(RM) · Varies by model
Measurement Accuracy
±2.0cm · Accuracy decreases at close range
Near Blind Zone
0.05m
Sampling Rate
43200点/秒 · Effective rate of 21600 points/sec
Horizontal/Vertical Scanning Frequency
11Hz / 180Hz
Strong Light Resistance
100Klux以上

Power

Power Consumption
6W

Others

Dimensions
75×75×65mm
Weight
230g
Implementation Technology
激光TOF,非接触无刷转镜扫描

Comparison with Similar Products

Specifications本品 · L1RPLIDAR A3RPLIDAR A1E1SEN0638-TF
Main controller————Kendryte K230
NPU————6 TOPS
Memory / VRAM————1 GB
Reference unit price¥999Request a QuoteRequest a QuoteRequest a Quote¥599
Inventory—————

Product introduction

The Unitree 4D LiDAR L1 is a bionic LiDAR designed for mobile robots, offering 360°×90° omnidirectional ultra-wide-angle non-repetitive scanning with a near-field blind zone as small as 0.05m, and an official starting price of 999 yuan. Its point cloud density is sufficient for low-speed mobile robots, supporting whole-room dynamic scanning, detection of highly transparent objects such as glass, and 100Klux strong-light resistance, making it suitable for indoor and outdoor navigation scenarios such as robot vacuums, smart delivery, and logistics warehousing.

Sources 宇树科技(Unitree)官网

Compilation Notes 内容由 AI 根据公开资料整理;事实与推断分开呈现。

Content Correction

Product parameter comparison

Product Selection Assistant

让需求变成可修改的筛选条件

依据已录入参数生成条件,结果可查看和修改。帧率与性能需核对实测,不能仅凭算力数值保证。